OTC Tools Code Scanner Manual Del Usuario página 44

5) Turn Ignition key to OFF Position.
At this point you can either
• Have your vehicle professionally
serviced. Codes indicate problems
found by the computer.
or,
• Repair the vehicle yourself using
service codes to help pinpoint the
problem. Refer to Test Results
Chart.
KOEO
CODES
11*
(all except
high altitude)
62*
(high altitude V-6
or V-8 ONLY)
65*
(high altitude
I-4 ONLY)
Any Code(s)
No Codes
Received
(STO light
always
on or off)
*Note: "High Altitude" refers to vehicles with computer adjusted for operation at high
elevations such as in Denver, Colorado.
ACTION TO TAKE:
System pass. No problem found by computer during KOEO Self-
Test. Go to SELF-TEST PART 3: Key On Engine Running
(KOER) Self-Test.
System pass. No problem found by computer during KOEO Self-
Test. Go to SELF-TEST PART 3: Key On Engine Running
(KOER) Self-Test.
System pass. No problem found by computer during KOEO Self-
Test. Go to SELF-TEST PART 3: Key On Engine Running
(KOER) Self-Test.
Codes indicate system problems are present now. Write down all
codes. Refer to vehicle service manual for code troubleshooting
charts and repair procedures. Repeat PART 2: Key On Engine
Off (KOEO) Self-Test after every repair. Do not proceed to SELF-
TEST PART 3 until a system pass code is received.
You have a problem which must be repaired before proceeding.
Refer to the vehicle service manual "Self-Test Not Functional" (or
similar title) troubleshooting chart.
44