Mechanical Hazards - Daikin MONTREAL XL Instrucciones De Operación

AHT Cooling Systems GmbH | en-US
§ Use a damp cloth or sponge to remove
condensation water and for cleaning. Do
not use dry cloths or sponges to dry the
appliance. (Risk of electrostatic charge
and sparking).
§ Do not obstruct the ventilation openings in
the appliance housing. Use only original
accessory parts.
§ Do not use any mechanical devices or
other means (e.g. ice scrapers) to acceler-
ate the defrosting process.
§ Do not operate any electrical devices (e.g.
wet vacuum cleaners) within the refrigera-
tor compartment that are not of the type
recommended by the manufacturer. Appli-
ance with explosion protection markings
[see } Chapter 2.1] are permitted.
§ Do not use steam or high-pressure clean-
ers for basic cleaning.
§ Only install the appliance in well-ventilated
rooms.
§ If the appliance is installed in cellars, en-
sure that there is sufficient ventilation.
§ Ducts and wall bushings must be sealed
underneath and behind the appliance to
protect against fire.
§ Do not damage the refrigerant circuit.
§ Do not expose the appliance to tempera-
tures higher than 70°C (158°F) during
transport and storage.
§ Avoid transmitting pulsations and vibra-
tions to the appliance.
§ Do not allow external forces to act on the
appliance, e.g. careless handling with a lift
truck or floor cleaning machine.
§ Do not drill holes in the appliance and do
not carry out any other work on the appli-
ance.
§ Do not crush or bend pipes.
§ Only qualified staff may carry out work on
the refrigerant circuit.
§ Only open the refrigerant circuit and suck
off the refrigerant in well-ventilated rooms
outside store business hours (when cus-
tomers are not present) or outdoors.
§ Before any maintenance, service or repair
work
1. Disconnect the appliance [see } Chap-
ter 10.2.1]
2. Secure the appliance against restarting.
§ During repairs, a competent person with
knowledge of local conditions must be
available as contact for the qualified staff.
CAUTION
Liquid refrigerant.
Frostbite to skin.
440195_1_0521
§ Wear safety goggles and safety gloves.
§ Protect hands and face from contact with
liquid/leaking refrigerant.
2.5.3

Mechanical hazards

WARNING
Transport of the units with industrial
trucks.
Risk of injury to persons in the event of a colli-
sion.
§ Observe transport routes for industrial
trucks.
§ Secure transported goods.
§ Only trained personnel may operate in-
dustrial trucks.
§ Observe the stacking height specifications
on the packaging.
Unit tipping hazard.
Persons may become trapped.
§ Do not climb onto or into the appliance.
Disposal of packaging material and
films.
Danger of suffocation.
§ Keep packaging material and film away
from children.
§ Do not allow children to play with packag-
ing material or film.
Missing and/or not fully functional
safety devices.
Risk of injury, e.g. from rotating parts.
§ Check to ensure safety devices are com-
plete and working.
§ Do not remove guards and covers at-
tached to the appliance.
CAUTION
Material breakage.
Falling hazard. Cuts.
§ Do not climb onto or into the appliance.
§ Do not apply any load to the lids.
§ After removing, keep the lids in a safe
place.
Falling objects.
Impact injury. Cuts in the event of glass
breakage.
§ Do not place any objects on the appli-
ance.
Leakage of defrosting water.
Slipping hazard.
Safety | 2
33 / 104