Fuse Replacement; Mounting Diagram - Chauvet DJ WashFX Guía De Referencia Rápida

Wash FX™ QRG EN
Wash FX™ has an auto-ranging power supply that works with a voltage range of
AC Power
100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Power linking is when products are daisy chained together through their Power In
Power Linking
and Power Out sockets, so that many products can be powered from one outlet.
For the maximum number of Wash FX™s that can be power linked at 120 V or at
240 V, see the User Manual or the label on the product.
The User Manual is available from the Chauvet website:
http://www.chauvetlighting.com.
1. Disconnect the product from power.

Fuse Replacement

2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the holder and replace it with a fuse of the exact
same type and rating.
5. Re-insert the fuse holder and reconnect power.
Disconnect the product from power before replacing the fuse.
Before mounting this product, read the Safety Notes. Make sure the mounting
Mounting
clamps (such as CLP-15 clamps from Chauvet) are capable of supporting the
weight of the product. For the CHAUVET line of mounting clamps, go to
www.chauvetlighting.com/cables-clamps-main.html.
Hanging/Mounting Bracket
Mounting Clamp

Mounting Diagram

Front View
Bracket
Adjustment
Knobs
Safety Cable
Back View
4