Operation; Dab Operation - auna Stereo Sonic DAB+ Manual De Instrucciones

EN
44

OPERATION

Muting
The volume is muted temporarily when pressing the MUTE button on the
remote control. Press again to restore the volume.
Volume control
Turn the VOLUME control or press the VOL-/VOL+ buttons on the remote
control to change the volume.
DAB/FM RADIO OPERATION
Basic operation
Insert the jack of the supplied mains adapter into the socket on the rear of
the main radio The display will
show "Scan Time". The unit is now updating the time from the broadcaster.
Wait for a while until it is finished
and the real time will be display.
Press the ON/STANDBY button to turn on the unit. To turn off, press the
ON/STANDBY button again.
DAB/FM/CD/AUX/Bluetooth
Press the DAB/FM button on the remote control or SOURCE button
repeatedly on the main unit to select
different sources.
Adjusting the Antenna
The antenna at the rear panel of the unit should be extended to ensure a
good DAB/FM reception. Alter the
antenna position for the best reception.

DAB OPERATION

The first time the DAB mode is selected, it will automatically scan for
available DAB stations. Wait until the scanning has finished. The display will
show the scanning progress. After scanning it will tune to the first station.
Auto Scan
1. Turn on the unit in DAB mode.
2. Press the SCAN button to start auto-scanning the available stations.