THOMSON MIC301BT Modo De Empleo página 17

USB CHARGER: 5V
1. In CD / USB / BT / Audio In mode, the user can connect the USB cable (not included) to a mobile
phone, and use it as a phone charger.
2. In Standby mode / Tuner mode, the charger has no function. Do not charge the battery in these
modes.
WARNING: INSERTING THE USB CABLE INTO THE WRONG SOCKET WILL RESULT IN A
SHORT-CIRCUIT.
For the USB charger, the user needs to insert the cable into the USB CHARGER Slot (15) ONLY.
Do not connect it to the wrong USB PLAYBACK Slot (14).
EQ (EQUALIZER)
• Press the EQ [11] button on the remote control to select the music format Rock / Pop / Classic / Jazz.
• Press EQ again to turn off the function.
MUTE
Press the MUTE button and there will be no sound.
Press MUTE again to turn off the function.
HEADPHONE
You can plug stereo headphones (not included) equipped with a 3.5 mm jack and impedance of 8 ohms
or greater into the unit's headphone jack (9). When using headphones, the speakers are automatically
disconnected.
WARNING: USING HEADPHONES AND HEARING IMPAIRMENT
• Set a low volume on the playback device before connecting the headphones to the sound source.
• Avoid excessive volume, particularly over extended periods or frequent use. Excessive volume can
result in permanent hearing impairment.
SPECIFICATIONS
Power supply: AC 100 – 240V ~ 50/60Hz
Power consumption: 30 WATTS
Radio frequency coverage: FM 87.5 – 108 MHz
Note:
When there is no sound output for about 30 minutes in CD, USB, Bluetooth or AUX mode, the
unit will automatically switch to standby mode to save energy. It can be turned on again using
the AUDIO IN / CD / USB / TUNER / Bluetooth Function button.
1A
- EN 7 -