Features - Tripp-Lite SRCOOLNET2LX Guía De Instalación E Inicio Rápido

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Features

Ethernet Port: RJ45 jack connects the SRCOOLNET2LX to the network using a
A
standard Ethernet patch cable. The Link LED
operating conditions. See the LED Function Table for a description of LED
behavior.
Micro-USB Port: Use this port to directly connect with a computer running a
B
terminal emulation program. A cable (part number: 73176E) is included with the
SRCOOLNET2LX. If you need to order a replacement cable, contact Tripp Lite
Customer Support at 773.869.1234.
Type-A USB Port: Use this port to connect the included E2MT module for
C
monitoring ambient temperature conditions.
Note: Do not connect a keyboard or mouse to this port.
Reset Button: The reset button is recessed, accessible through a small hole
D
under the RJ45 network port. Use a paper clip or other suitable object to press
the reset button for 3 seconds to reboot the network interface. Rebooting the
network interface will not erase network settings or interrupt AC power. Press and
hold the reset button for 20 seconds to restore the network interface to its factory
default settings. Restoring to the factory default will erase all previously saved
data—including network settings—without interrupting AC power.
Status LED: Shows SRCOOLNET2LX status. See the LED Function Table for a
E
description of LED behavior.
18-06-379-93387E.indb 10
A
A1
D
A2
10
and Status LED
A1
A2
B
C
E
indicate the
7/26/2018 4:20:00 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido