JB Systems DJ-KONTROL 2 Manual De Instruciones página 8

ENGLISH
FUNCTIONS (PLAYERS)
19. SET CUE button: sets the track at the desired location. It also
sets the audio to the last set cue position. Keep the button pressed
to preview the cue point until the button is released.
20. CUE PLAY button: starts playing the track from the last set cue
position.
21. PLAY PAUSE button: used to start/stop playback of the loaded
track.
22. JOG WHEEL: its function depends on the selected play mode:
 In pause mode: the wheel allows you to set a cue point or
starting point very precisely.
 In play mode: the wheel acts as pitch bend.
 In loop mode: press SHIFT-button (32) while turning the JOG-
wheel to move the position of the playing loop.
 Scratch button (23) lit: with the scratch function enabled, the
wheel allows you to scratch the track much like a vinyl record. To
increase the vinyl feeling, the jog wheel is touch sensitive: this
means that playback will stop as soon as you put your hand on
the wheel.
 Scratch button (23) blinking: turn the wheel to browse/search
the entire track at high speed.
23. SCRATCH button: different functions are possible:
 Press shortly: to toggle between browse mode (button not lit)
and scratch mode (button lit) for the jog wheel (22).
 Press for 0,5sec: to activate/de-activate the high speed
browse/search function for the jog wheel (22). While activated
you can search the entire track at very high speed.
24. SYNC button: used to synchronize the loaded track automatically to the track playing on the other deck.
Pressing the SYNC-button together with the SHIFT-button (32) allows you start your track immediately in
sync with the track playing on the other deck. (also named "sync-start")
25. LOOP IN button: different functions available:
 No loop is playing: press the LOOP IN button to set the intro point of a manual loop.
 A loop is playing, SHIFT not pressed: press the LOOP IN button to retrigger the playing loop (stutter
effect).
 A loop is playing, SHIFT pressed: press the LOOP IN button while the SHIFT-button (32) is pressed
to cut the length playing loop in two.
26. LOOP OUT button: different functions available:
 No loop is playing: press the LOOP OUT button to set the end point of a manual loop, the loop starts
playing immediately.
 A loop is playing, SHIFT not pressed: press the LOOP OUT button to leave the playing loop.
 A loop is playing, SHIFT pressed: press the LOOP OUT button while the SHIFT-button (32) is
pressed to double the length playing loop.
27. RELOOP button: different functions available:
 A loop is programmed: while the loop is playing, press the RELOOP button to re-start the loop
immediately (stutter effect). When no loop is playing: press the RELOOP button to enter the last
played loop again.
 Create a 4/1 SMART LOOP: press the RELOOP button while the SHIFT-button (32) is pressed to
create an automatic 4/1beat smart loop.
28. KEY LOCK button: different functions available:
 Master Tempo: activates the pitch lock function. This function allows you to make adjustments to a
track's speed using the SPEED fader (29) without altering the tonal pitch.
 Change the pitch range: press the LOOP OUT button while the SHIFT-button (32) is pressed to
change the range of the pitch fader: 6, 8, 16, 50 or 100%
29. SPEED FADER: used to change the playback speed of the playing track.
30. PITCH BEND buttons: The speed rises while the "+ button" is pressed and returns to the original pitch
when the button is released. The speed drops when the "– button" is pressed and returns to the original
pitch when the button is released. These buttons can be used to manually synchronize the beats of 2
tracks.
31. HOT CUE buttons: used to set 3 different hot cue points.
®
JB SYSTEMS 6/50
USER MANUAL
DJ-KONTROL 2