Your New Radio; Turning Your Radio On And Off; Radio Etiquette; Batteries And Battery Charging - Motorola Talkabout T5412 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59

Your New Radio

Motorola T5412 and T5422 two-way radios operate on
PMR446 frequencies, and can be used in any country where
PMR446 frequencies are authorized, subject to applicable
regulations. This license-free, two-way radio service is for
family and group recreational use. Use of this radio outside
the country where it was intended to be distributed is subject
to government regulations and may be prohibited. Read this
manual carefully and make sure you know how to properly
operate the radio before use.
Please retain your original dated sales receipt for your
records. For warranty service of your Motorola two-way
radio you will need to provide a copy of your dated sales
receipt to confirm warranty status.

Turning Your Radio On And Off

Turn P clockwise to turn your radio on. The radio chirps and
the display will show all feature icons that your radio has
available for a brief period. The display will show the channel
1 - 8 and interference eliminator code 0 - 38. Turn P
anticlockwise to turn your radio off.

Radio Etiquette

It is good radio etiquette to monitor the channel for activity
before you transmit, to ensure that you do not interrupt other
users already on the channel.
Press and hold Q to check for channel activity. If you hear
static, the channel is clear for use.

Batteries and Battery Charging

Both T5412 and T5422 radios operate with 3 AA Alkaline
batteries or a Nickel Cadmium (NiCd) rechargeable battery
pack. A rechargeable upgrade kit is supplied with T5422
models or can be purchased separately from your supplier.
Installation of AA Batteries
• Lift battery latch up to release the battery cover.
• Insert 3 AA batteries as shown.
• Reposition battery cover and press down until it clicks
into place.
Installation of NiCd Batteries
Caution: Do not disassemble
or unwrap the battery pack.
• Lift battery latch up to release
the battery cover.
• Insert NiCd battery pack.
Ensure the metal contacts on the side of the battery are
facing outwards from the radio to connect with contacts on
the battery door.
• Reposition battery cover and press down until it clicks
into place.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido