SELECTING A LOCATION - IMPORTANT (CONTINUED)
IMPORTANT: The effectiveness of the dehumidifier can be influenced by different factors. One factor
is the rate at which new, moisture-laden air enters the room and the amount of air circulating in and
out of the area to be dehumidified. For example, if a door to a basement is constantly opened, letting
new, moisture-laden air into the room, dehumidification will take longer than if the door was kept
closed. If the dehumidifier is in a room with a storage closet or cabinets, it will have little or no effect
in drying the inside of the storage closet or cabinets unless there is adequate circulation of air in and
out of these spaces. To dehumidify these spaces, open the storage door or cabinet doors to allow air
circulation. You may find that installing a second dehumidifier may be required for larger enclosed
areas.
UNPACKAGING THE DEHUMIDIFIER
Float
This Dehumidifier is packaged with a colored or transparent
(without polyfoam)
tape to secure some parts during transportation.
Remove all the colored or transparent packaging tape from
the unit.
Remove this packaging tape before use. If you do not remove
it, the Dehumidifier will not switch ON and a blinking red
light will appear.
There is a Float (without polyfoam) located inside the water
tank. This works to sense the level of the water inside the
tank.
DO NOT REMOVE THIS FLOAT.
EN
4