NuWave Duet 33816 El Manual Del Propietario página 22

AIR FRYING INSTRUCTIONS
STAGE
Stage cooking is used to cook foods at different temperatures and times
throughout the cooking process. Up to 5 stages of cooking can be set up.
DELAY, PREHEAT, SEAR 1, SEAR 2, AND WARM are NOT considered
stages. Stage 1 cooking is the default (360°F for 15 minutes).
1. Plug the power cord into an electrical outlet.
2. Press AIR FRY.
• The lights will be on 1-2 seconds
then go out indicating those
functions are available for use. The
display will show air fry, temp, and
360F. This is Stage 1.
3. Adjust the cooking temperature by
turning START/PAUSE until the desired cooking temperature
is reached.
4. Press TIME and use START/PAUSE to adjust Stage 1 cooking time.
5. To add an additional stage, press
STAGE once. The display will show
stage, and 2 (above stage). This is
Stage 2 cooking.
6. Adjust Stage 2 cooking temperature by
turning START/PAUSE until the desired
cooking temperature is reached.
7. Press TIME, the display will show
00:00, time, stage and 2 (above stage). Use START/PAUSE to
adjust Stage 2 cooking time.
8. To set additional stage cooking settings, repeat steps 5-7.
• The number above stage will change after you press STAGE
and set temperature and time.
• After Stage 5, when STAGE is pressed again the unit will go
back to Stage 1. The display will show Stage 1 set cooking
temperature, temp, stage, and 1 (above stage).
9. If you only want 2 stages of cooking, leave the time at 00:00 for
stages 3-5 and those stages will be skipped.
10. Press START/PAUSE to begin cooking. The unit will cook with
the set functions.
11. During cooking, press STAGE to see and adjust upcoming cooking
stages and cooking functions (sear 1 & 2, preheat, and warm).
12. When finished cooking the display will show End and the unit will
beep 3 times.
22 22
air frying instructions
Stage 1
360F
Stage 2
360F
2