PRESSURE COOKING INSTRUCTIONS
PRESSURE COOK
1.
Ensure the Stainless Steel Inner Pot is
in your Duet.
2.
Plug unit into in to turn on.
3.
Press PRESSURE COOK.
• The lights will be on 1-2 seconds
then go out indicating those
functions are available for use.
Note: The Duet will go into standby mode
after 5 minutes of no interaction. Simply
press any button or turn START/PAUSE to
"wake up."
4.
Press PRESSURE to switch from HIGH
to LOW pressure.
5.
Press TIME, time can be adjusted
using START/PAUSE.
6.
Turn the Pressure Cooker Lid
clockwise until it locks. The "Lock"
symbol will show on the display when the
Lid is in place.
7.
Turn the Pressure Release Switch/
Valve to the CLOSE position.
8.
Press START/PAUSE to begin cooking.
• The circulating box indicates that the
Duet is preheating/pressurizing.
• Once the Duet gets to correct
pressure, the unit will beep once,
the display will show pressure cook,
high, 00:30 (default time). The colon (:) will flash, indicating
the Duet is currently cooking and 30 minutes remain.
9.
Once the Duet finishes cooking, the display will show End and the
unit will beep 3 times.
Note: To natural release pressure, turn
the Duet off and unplug. Allow the Duet to
naturally release the pressure. To quick release
pressure, carefully turn the Pressure Release
Switch/Valve to the "OPEN" position until all
steam/pressure is released. Remember to always turn the Pressure
Release Switch/Valve to the "OPEN" position before opening the
Pressure Cooker Lid to ensure all pressure is released.
14
14
pressure cooking instructions
00:30