NuWave Duet 33816 El Manual Del Propietario página 25

4. Press START/PAUSE to begin cooking. The display will show
sear 1 (flashing), 2, time, and the set sear 1 time with the colon
(:) flashing.
5. Once the Sear 1 cycle is complete the unit will beep once and
will automatically go into regular stage cooking. The display will
show sear 2, time, and the set regular stage cooking time (00:15
default) with the colon (:) flashing.
6. Once the stage cooking cycle is complete the unit will beep once
and will automatically go into sear 2 cooking. The display will
show sear 2 (flashing), time, and the set sear time (00:05 default)
with the colon (:) flashing.
7. When the unit is finished cooking the display will show End and
the unit will beep 3 times.
Sear 2
Default Sear 2 temperature is 400˚F and
default sear 2 time is 5 minutes (00:05).
1. Adjust your cooking temperatures and
times for stage cooking.
2. Press SEAR 3 times. This will engage
the Sear 2 function.
3. The display will show 400F, sear, 2
(flashing), and temp.
• Sear 2 searing temperature can be adjusted by turning START/
PAUSE. 400˚F is the maximum searing temperature.
• Press TIME and turn START/PAUSE to adjust the sear 2
searing time up to 5 minutes (00:05).
4. Press START/PAUSE to begin cooking. The display will show
sear 2, time, and the set regular stage cooking time (00:15
default) with the colon (:) flashing.
5. Once the stage cooking cycle is complete the unit will
automatically go into sear 2 cooking. The display will show sear
2 (flashing), time, and the set sear time (00:05 default) with the
colon (:) flashing.
6. When the unit is finished cooking the display will show End.
7. Press SEAR 4 times until sear, 1, and 2 are no longer lit in the
display, to clear the Sear function.
Sear 2
400F
nuwavenow.com nuwavenow.com
25 25