Tools You Will Need - IKEA LAGAN Manual De Instrucciones

Ocultar thumbs Ver también para LAGAN:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Tools you will need

(Wear safety glasses when using tools):
For leveling legs and Anti-Tip Bracket:
Adjustable wrench or channel lock pliers
5/16" Nutdriver or flat head screwdriver
Electric drill & 1/8" drill bit (3/16" Masonry drill
bit if installing in concrete)
Spirit Level
Tape measure
For gas supply connection:
Adjustable wrench and pipe wrench
For burner flame adjustment:
Phillips head and small flat-blade screwdrivers
Materials you will need:
Pipe joint sealant that resists action of LP/
Propane gas (Fig. a)
Gas line manual shut-off valve (Fig. b)
Use new flare union adapters (1/2" NPT x 3/4"
or 1/2" I.D.) (Fig. c)
A new flexible metal appliance conduit (1/2" NPT
x 3/4" or 1/2" I.D.) must be design certified by
CSA International. Because solid pipe restricts
moving the range, we recommend using a new
flexible conduit (4 to 5 foot length) for each new
installation and additional reinstallations. (Fig. d)
6
Materials
Fig. a
Fig.b
Materials supplied with appliance
1x
1x
Fig. c
Fig. d
1x
1x
2x
AA-2195041-2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

MotsvarigGrundlägga

Tabla de contenido