TallyGenicom 6600 Serie Guía De Referencia Rápida página 16

Loading Ribbon Cartridge And Paper
1
Platen Lever
Figure 9. Set the Platen Lever based on the Paper Thickness
16
Vertical Position
Knob
A
Platen
Stop
183444 REV B
13. Raise the platen lever all the way.
14. Turn the vertical position knob to feed the paper up into the
paper guide assembly.
15. Turn the platen stop knob clockwise or counterclockwise to
match the paper thickness. (The A-B-C scale corresponds
approximately to 1-, 3-, and 6-part paper thickness).
NOTE: The platen stop allows you to set an optimum and
consistent thickness that is not affected when opening and
closing the platen lever.
16. Lower the platen lever until it stops.
Paper Thickness
Indicator
A
Platen Stop
Knob