TallyGenicom 6600 Serie Guía De Referencia Rápida página 25

Most Frequent Problems and Solutions
Problem
Poor print quality
•
dark print
•
light print
•
light print on half of the page
•
missing dots or characters
•
smeared print
•
wavy vertical lines
Torn or damaged forms
Loss of forms position
Corrective Action
•
Lower the forms thickness lever.
•
Adjust the forms thickness lever setting.
Print quality can be affected if it is too loose
or too tight.
•
Adjust the paper tension horizontally by
moving the right tractor. Print quality can be
affected if it is too loose or too tight.
•
Make sure the ribbon threads between the
hammerbank cover and ribbon mask, as
shown on the ribbon path diagram on the
pedestal models. Turn the ribbon cartridge
knob clockwise to ensure that the ribbon
tracks correctly in the ribbon path.
•
Be sure to use an approved ribbon.
•
Reset the forms thickness lever for thicker
paper.
•
Adjust the paper tension horizontally by
moving the right tractor. Too high a paper
tension can cause tearing of the tractor feed
holes.
•
Check the paper slot for foreign material.
•
For thick, multipart forms, set the Perf. Skip
to Enable. Refer to the Printer Control Menu
in the User's Manual.
•
Set the forms thickness lever for thicker
paper.
1
25