HANDLE INSTALLATION & SEALING
1. Install the door handle (M) on both sides using Allen keys.
2. Ensure that the door closes tightly and opens smoothly, and that there is a tight connection
between the side glass panels and the frame as well as the support bar.
Apply a clear silicone water sealant around the outside perimeter of any fixed shower components
(horizontally between bottom of fixed side glass panel and base, as well as vertically between the
wall, glass frames, and any side glass panel).
Allow 24 hours for silicone to dry.
Improper application of silicone sealant may cause your shower to leak.
1
M
Outside
Inside
2.5mm
2
14