DOOR PANEL INSTALLATION
1. Mount the two door rollers (H) onto the door panel (J) using Allen key. Use a ratchet to strongly
tighten the bolts.
2. Place the door (J) on the bar (F) while smoothly inserting it into the guide (Q).
3-5. Install the anti-jump pegs (I) and attach the strips (P & K) on the fixed panel (C) and the door (J).
Use a ratchet to strongly tighten the bolts.
1
2
H
5mm
F
J
J
3
4
5mm
I
P
C
C
J
J
5
K
J
C
12