CARE AND CLEANING
Replacing the Oven Light
CAUTION
Be sure the oven is unplugged and all parts are
cool before replacing the oven light.
Replacing the oven interior light bulb:
The interior oven light is located at the rear of the
oven cavity and covered with a glass shield. The
glass shield must be in place whenever the oven is
in use.
1. Turn electrical power off at the main source or
unplug the appliance.
2. Remove the interior oven light shield after re-
moving the wire holder by carefully moving the
wire to the side of the glass shield. The tension
from the wire holds the glass shield in place.
3. Pull the shield straight out. Do not twist or turn.
4. Replace the bulb with a new appliance bulb.
5. Replace the glass oven light shield. Replace wire
holder.
6. Turn the power back on again at the main source
(or plug the appliance back in).
7. Be sure to reset the time of day on the clock.
glass
shield
wire
holder
Figure 27: Oven light protected by glass shield
44
Removing the Storage Drawer
Use the storage drawer for storing cooking
utensils. The drawer can be removed to facilitate
cleaning under the range. Use care when handling
the drawer.
Figure 28: Open storage drawer
Figure 29: Closed storage drawer
EN