Brita WHS - 101 Instrucciones De Instalación página 10

household filtration
Use and Care
Brita Heavy Duty Drop-in Filtration WHS-101
®
Usage and quality of water in your cold water line affect the life of filter cartridges.
Cartridges should be replaced sooner if water pressure at the faucet begins to drop
noticeably or if the filter fails to perform satisfactorily.
After prolonged periods of non-use, it is recommended that the filter be
flushed thoroughly. Let water run for 10 minutes before using.
The filter used with this filter housing has a limited service life. Changes in
taste, odor, and/or flow of the water being filtered indicate that the filter
should be replaced.
Housing
WHS-101 Heavy Duty Drop-in Filtration
Replace filters every six months or when flow rate
decreases significantly.
The above flow rates are not performance tested or Certified by NSF.
Replacement Parts
Part Number
WFBAB-100
WFBAO-100
WFBAW-100
10
Filter Model Numbers
WHF-204 -Sediment Carbon Wrap
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
WHF-205 -GAC Heavy Duty Drop-In Filter
Flow Rate: 10 gpm (37.85 lpm)
Operating pressure 30-100 psi (207-690kPa)
WHF-201 - Poly Pleat
Flow Rate: 10 gpm (37.85 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
Description
Mounting Bracket
O-Ring
Housing Wrench