Carton Contents; Parts Identification - Husqvarna 591111301 Manual Del Propietário

KNOW YOUR GRASS CATCHER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS
CATCHER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the
assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass
Catcher and to prevent injury to yourself and others. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe
eye damage. Always wear safety glasses or eye shields before starting your tractor and while mowing.
We recommend a wide vision safety mask for over the spectacles or standard safety glasses.
COMPLETE BAGGER MUST BE IN PLACE BEFORE OPERATING MOWER
UNPACKING INSTRUCTIONS
• Remove all parts and packing materials from carton.
• Check carton contents against list. Be sure all parts
are there.

PARTS IDENTIFICATION

COVER
GRASS
CATCHER
CONTAINERS
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the
tractor, in the operator's position.
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
• Depress clutch/brake pedal fully and set parking brake.
• Place gearshift/motion control lever in "NEUTRAL" position.
• Place attachment clutch in "DISENGAGED" position.
• Turn ignition key "OFF" and remove key.
• Make sure the blade and all moving parts have completely stopped.
• Disconnect spark plug wire from plug and place where it cannot come in contact with plug.

CARTON CONTENTS:

(3) Containers
(1) Upper Chute
(1) Lower Chute
(2) Support Assembly
(1) Cover Assembly
SUPPORT
ASSEMBLY
(VERTICAL
DRAWBAR)
FULL BAG
INDICATOR
CHUTE
LATCH
BOLT
3/8-16
UPPER
CHUTE
KNOB
4
RETAINER
SPRING
BOLT
3/8-16
LOWER CHUTE
KNOB
(1) Retainer Spring
(2) Shoulder Bolts
(2) Bolts 3/8-16
(2) Knobs
SHOULDER
BOLTS
SUPPORT
ASSEMBLY
(SLOPED
DRAWBAR)
RETAINER
SPRING