Cleaning And Maintenance - Predator PUR30WIFI Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

-Pull the plug out of the socket.
-Clean the outside of the device with a soft damp cloth. Dry the device carefully afterwards.
-Ensure no water gets into the motor part of the device.
FILTER
Replace the fi lter after 2000 operating hours
1_ Turn the device upside down
2_ Open the base of the device at the bottom by turning it clockwise
3_ Remove the base. Remove the fi lter from the device.
4_ Insert a new fi lter
5_ Put the base back on the device. Ensure the arrow on the base matches the arrow on the device. Tighten
the base anticlockwise.
6- To reset the fi lter switch
and the counter will restart.
www.glaziar.com / info@glaziar.com

CLEANING AND MAINTENANCE

, press and hold the switch for 5 seconds. The indicator light will stop fl ashing
ENVIRONMENTAL GUIDELINES
This symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it must be brought to the applicable collection
point for recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product, please contact your local city offi ce, your household
waste disposal service or the shop where you purchases the product.
The packaging is recyclable. Please treat the packaging ecologically.
re
14

Publicidad

Tabla de contenido
loading

Tabla de contenido