Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Description of parts (Fig. 1)
A Air outlet
B Release button
C On/off switch, fan settings
D Air inlet
E Hanging loop
F Mains cable
G Round thermal brush Ø25 mm for small waves
H Round thermal brush Ø30 mm with extendable
bristles for medium waves
I
Round thermal brush Ø38 mm for volume and large
waves
Operation
·
Prior to using the appliance, dry the hair with a
towel and comb.
·
Plug the power plug into the mains socket (Fig 1).
·
The appliance has three temperature / fan settings.
·
Switch on the appliance at the on/off switch
and select the desired temperature/fan setting
(Fig. 2ⓐ).
0 Off
I
Setting 1, for a gentle airflow with warm air
II Setting 2, for a strong airflow with hotter air
❆ Cold-shot button
·
Using the on/off switch, switch off the appliance
after use (Fig. 2ⓑ).
·
Disconnect from the mains power supply.
·
Allow the appliance to cool down.
Attaching/removing round brushes
·
Position the round brush and press it onto the hous-
ing (Fig. 4ⓐ). Pay attention to the mark!
·
Turn the round brush in the direction of the arrow
and lock in position (Fig. 5ⓐ).
·
To remove the round brush, press the release but-
ton (Fig. 5ⓑ).
·
Turn the round brush in the direction of the arrow
(Fig. 5ⓒ) and remove from the housing (Fig. 4ⓑ).
Round brush with extendable bristles
·
The bristles are extended by turning the top of the
brust in the direction of the arrow (Fig. 3ⓐ)).
·
Bristles are retracted by turning the top of the brush
in the opposite direction (Fig. 3ⓑ).
Tips for successful styling
·
Wash hair, rinse and dry slightly. Best results are
achieved when hair is damp.
·
Brush or comb hair.
·
Section off individual strands of hair.
·
Roll the section of hair, starting from the end and
working upwards, around the thermal round brush
to form a curl.
·
Set the appliance to setting 1 or 2 until the section
is dry.
·
Note: Do not leave sections of hair wrapped around
the thermal round brush for too long, otherwise this
could damage the hair.
·
Switch on the cold-shot button to set the curl.
·
When using the thermal round brushes Ø25 mm
and Ø38 mm, unwind the hair from the brush.
·
When using the round brush Ø30 mm with extend-
able bristles, retract the bristles (Fig. 3ⓑ) and slide
the brush out of the curl from the side.
·
Repeat on other sections to dry and style.
Cleaning and care
·
Before cleaning the appliance, disconnect from the
mains and allow it to cool down.
·
Do not immerse the appliance in water!
·
Only wipe the appliance with a soft cloth, which
may be dampened slightly. Do not use solvents or
abrasives!
·
To maintain the performance of your appliance,
regularly clean the air inlet with a soft dry brush.
·
Clean the round brushes to remove gel and spray
residues. To do so, remove the round brush and
clean it with warm, soapy water. Allow to dry.
Attention: Round brushes may be used only when
·
dry.
Disposal
Adhere to the relevant legal requirements when dispo-
sing of the appliance.
Information on the disposal of electrical and elec-
tronic appliances in the European Community:
Within the European Community, national
regulations are specified for the disposal of
electrical appliances, based on EU Waste
Electrical and Electronic Equipment Directive
2012/19/EC (WEEE). In accordance with this,
the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge
by local collection points or recycling centres.
The packaging for this product is made from
recyclable materials. Dispose of this in an
environmentally friendly manner by recycling it.
ENGLISH
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
11
Publicidad
Tabla de contenido
