Activating The Cooktop - Signature Kitchen Suite SKSIT3601G Manual Del Propietário

18 OPERATING INSTRUCTIONS

Activating the Cooktop

To turn ON the cooktop, touch the POWER key for
approximately 1 second. The LCD panel will turn on.
To turn OFF the cooktop, touch the POWER key.
NOTE
After turning on the cooktop with the POWER key,
you must select one of the cooking zones within
60 seconds. If no selection is made, the cooktop
will turn off for safety.
Automatic Detection
• The automatic detection is the function that checks
whether or not a container is placed on top of the
burner.
• When a container is placed on the burner, the
words "Auto Detected" will be displayed.
(The words "Auto Detected" will disappear after 30
seconds or when the burner is running.)
• The words "Auto Detected" will not be displayed
if a container is not placed on the burner, and this
function is activated initially only once after the
power is turned on.
• Depending on the conditions of use (whether
the burner is being used, the container material,
status of the container base, etc.), the automatic
detection time may differ or the cookware may not
be detected automatically.
NOTE
• If the cookware is too small, the words "Auto
Detected" may not be displayed.
• Minimum Cookware Size
− Use cookware with a bottom surface diameter
of 5.5" (140 mm) or greater.
− For Flexible Cooking Zone, minimum
cookware size is 4.7" x 10.6" (120 mm x 270
mm)
Selecting the Cooking Zone
Place an induction-compatible pan on top of the
desired cooking zone.
Touch the icon in the desired cooking zone to set
the power level.
NOTE
Once the cooking zone has been selected the
power level must be selected within 3 seconds
with the element power settings. Otherwise, the
power settings will turn off for safety.