40 Troubleshooting; Before Calling For Service - Signature Kitchen Suite SKSIT3601G Manual Del Propietário

40 TROUBLESHOOTING

TROUBLESHOOTING

Before Calling for Service

Before you call for service, review this list. It may save you time and expense. This list includes common
occurrences that are not the result of a defect in workmanship or materials.
Symptoms
Cooktop does not
work.
Cooktop does not
heat.
Element turns off
while cooking.
Elements do not get
hot enough.
A fan sound can be
heard.
Possible Cause / Solutions
• Cooktop controls are locked.
- See Clean Lock to turn off the Clean Lock feature.
• Circuit breaker has tripped or fuse is blown.
- Reset the circuit breaker.
• Power outage.
- Check house lights to confirm power outage.
• Installation wiring not complete.
- Contact the installer or dealer.
• Incorrect cooking zone selected.
- Make sure the correct control is ON for the cooking zone being used.
• No power to cooktop.
- See "Cooktop does not work" above.
• Cooktop inner temperature too high.
- Check that cooktop has been installed according to the installation instructions.
• Touch controls may not be set properly.
- Check the power level.
• Cookware that is not marked "IH" or convection compatible may not heat
properly.
- Use cookware with the IH mark.
• Cookware may not be flat or the correct shape or size.
- Use cookware with a flat bottom.
- Minimum Cookware Size
1. Use cookware with a bottom surface diameter of 5.5" (140mm) or greater.
2. For Flexible Cooking Zone, minimum cookware size is 4.7" x 10.6" (120 mm
x 270 mm)
- For best results when using the Dual cooking zone, use cookware with a
bottom surface that is 9" in diameter or larger.
- Use the recommended cookware. See "Induction Cookware".
• Cooktop inner temperature is high.
- This is normal.
The cooling fan will run when any element is turned on. With heavy use the
fan may continue to run after the controls are turned off until the cooktop has
cooled.