Kohler K-6918 Guía De Instalación Y Cuidado página 16

Troubleshooting (cont.)
Symptoms Cause
2. Leaks A. Gaskets not
from positioned
behind correctly.
bowl.
3. Bowl is A. Threaded rods are
loose on protruding too far
the from wall.
threaded
rods.
B. Fasteners are not
tight.
1287824-2-A
Recommended Action
A. Remove the bowl and
inspect all the gaskets.
Reposition the gaskets if
needed. Lubricate the
gaskets so they slide in or
over the mating part they
seal. Reinstall the bowl,
making sure the gaskets
stay in the correct positions.
A. Remove the bowl. Adjust
the threaded rods until they
are 3" (76 mm) from the
finished wall.
B. Make sure the pegs are
oriented with the notches
facing down. Use the tool to
secure the bowl. Refer to
the "Install the Bowl"
section.
16 Kohler Co.