Install The Seat - Kohler K-6918 Guía De Instalación Y Cuidado

8. Install the Seat

Install the anchors but do not fully tighten.
NOTE: Do not install the caps at this time.
Push the seat onto the pins and then rotate down to rest on the
bowl.
Check the seat alignment with the bowl.
Adjust the Seat
Tilt the seat up and press the button to remove it from the pins.
Shift or rotate the anchors to adjust the seat position.
Push the seat back onto the pins and recheck alignment.
Kohler Co.
Button
11 1287824-2-A