AGPtek M30 Manual Del Usuario página 12

 Auto tune/save to preset/Clear preset
- "Auto tune". Search stations automatically. You can see the searched stations in "Presets".
While is on radio playing interface, click
button to adjust the frequency slightly. Press
- "Save to preset". Save the station you are listening to "Presets" list.
- "Clear preset". Click "Clear preset" to enter the Presets, choose the station you want to clear,
then click and choose "Yes" to clear the preset station.
 Tuner Region. If you are in Japan, please select Japan Band. For other regions, please select
Common Band, otherwise some FM broadcasts will not be received.
 Start FM Recording. Click button
"Yes" to save the recording file.
 FM Library. Find the radio recordings in FM radio > FM Library. The radio recordings will also
be found in Recordings > Recordings library or Folder>RECORD
Note:
1. When using the radio function for the first time or when there is no station, the station can
be added by [Station list], [Manual Tune], [Auto Tune].
2. If you can't search for an FM radio station, or if the FM sound quality is not good, please try
adjusting the position of the wired headset or antenna. In some remote places, the FM
signal may be poor. Please contact the local staff working in FM broadcasting to confirm
whether the FM signal is covered or not.
3. While it's on radio playing interface, click
4. FM radio supports listening with the wired earphones connection/Bluetooth connecti
on
1) Wired earphones listening: Before turning on the FM radio, you should
connect to the wired earphones for listening;
2) Bluetooth
or antenna to receive the signal, and then connect Bluetooth devices
Recordings
 Choose "Start voice recording" and press button
pause. Press the button
 Recordings library. Find the saved recordings in Recordings >Recordings library.
 Save location. Choose to store your recordings in internal or external memory. Confirm your
selection with button
Note: Save location function is only available when SD card inserted.
 Record Format. Choose the record format between MP3 Rec/WAV Rec.
 Set REC bitrate. Choose to set REC bitrate，the higher bitrate, the better of the sound quality,
and recording files larger as well
 Track AVR mode. When you start recording under AVR mode, the recorder will start recording
automatically if sound is detected and stop recording when no sound detected.
Settings
 Language. Choose system language
connection listening:
and choose "Yes" to save the recording file.
.
/ to switch among preset stations, click
to pause/resume the radio.
to pause/continue FM recording, click
and choose "Yes" to turn off the FM radio.
You can
to start voice recording, press again to
10
use the wired
/
and select
earphones