AGPtek M30 Manual Del Usuario página 5

For First Use
Before you start using AGPTEK-M30, please check the following information.
Computer System Requirements
When you connect AGPTEK-M30 to your computer, check the system requirements of your
computer ,The system must support the standard USB2.0 port.(Windows®
98/2000/ME/XP/7/Vista/10/Mac OS/Linux）.For other systems, M30 may not be recognized
properly. Some systems may need to install drivers manually.
How to reset or format the device:
Find Settings > Factory settings/Format device, choose Yes or No to make or cancel the
changes.
Note: Format the device will delete all of the data in this player. Before formatting the device,
please backup the files so as not to lose any files.
How to Charge the player：
Charging port/Data transmission port
1. Connect the player to an adapter(5V/500mA ) with a USB cable. Usually, it will need about
2 hours to charge the player.
2. Charge by computer: Connect the device to a running computer via the USB cable included.
USB 2.0 port only. Usually, it will need about 2 hours to charge the player.
Note: If the charging condition doesn't meet the standard, it may cause device malfunction,
which would be regarded as man-made damage.
How to transfer data by computer?
1. Connect your player to your computer via USB cable properly.
2. Double click "Computer" on the desktop and find the AGPTEK-M30 disk, and then double
click to open it.
3. Find the file or file folder you need in the computer, right click it and choose "Copy", then in
the AGPTEK-M30 disk window, right click and choose "Paste" and the files will be
transferred to the AGPTEK-M30 disk. Or you can simply drag the files you need and drop
them in the AGPTEK-M30 disk window.
3