Display (Optional) - Eaton xChargeIn Instrucciones De Manejo

Displays and operating elements
4.2

Display (optional)

Devices with energy meters (xChargeIn S Series and M Series) have a (dot
matrix LED) display.
Fig. 4-6: Display
The display may show different information depending on the operating sta-
tus (e.g., software version, IP address, authorization request). The main
task, however, is to display the status of the internal energy meter. During
periods of inactivity, the display brightness is reduced and switched off after
a few minutes.
The display lights up through the housing and is only visible when the power
supply is active.
4.2.1 Display with energy meter
The following information is shown on the display:
4.2.2 Display with calibratable energy meter
MID
For calibratable energy meters, additional MID-relevant contents are dis-
played. These are furnished with a special marking:
112
Display
Sum of total transmitted energy
Display during startup of the charging station
Transmitted energy of the current charging process
Display at start and after completion of a charging process
Text display, e.g. call to action or information about the charging
process
Description
Operating instructions V1.04
xChargeIn
© EATON