Tabla de contenido
Publicidad
Read, understand and keep the
User Manual.
Wear safety glasses.
Applicable Documents
The local safety regulations apply.
► In addition to this User Manual, read,
understand and keep the following
documents:
– Instruction manual of STIHL pres‐
sure washer being used
Videos
stihl.com/sxbyL2
User Information
Main Parts
A
1) Tube
2) Suction tube
3) Hose
Safety information
The sand and wet-blasting kit is used for
wet blasting of masonry and metal parts.
STIHL recommends using STIHL gran‐
ules or other blasting granules with a
grain size of 0.8 mm for sand and wet-
blasting kits.
Only suitable for use with STIHL RE ser‐
ies pressure washers.
The pressure specification (p
temperature specification (t
pressure washer must not be higher
than the pressure specification and tem‐
4
) and
max
) of the
max
perature specification on the accesso‐
ries.
Assembling
► Fixing the sand and wet-blasting kit
B.
Working
► Immerse the suction tube into the
granules
B.
► Move the sand-wet jet evenly along
the surface to be cleaned.
After finishing work
► Remove suction tube and press lever
of spray gun
► Lift the suction tube and press the
lever of the spray gun until the gran‐
ules are flushed out of the sand and
wet-blasting kit
Cleaning
► Clean the sand and wet-blasting kit
with a damp cloth.
Informations concernant la
présente Notice d'emploi
Symboles d'avertissement
Les symboles d'avertissement figurant
sur le dispositif de sablage humide signi‐
fient ce qui suit :
Respectez les consignes de
sécurité et leurs mesures.
Lisez, comprenez et conservez
les instructions d'utilisation.
Portez des lunettes de sécurité.
Documents en vigueur
Les règles de sécurité locales s'appli‐
quent.
0457-367-0040-B. VA0.D21.
C.
C.
Publicidad
Tabla de contenido
