Cleaning And Maintenance - Domo DO9243I Manual De Instrucciones

COMPRESSOR SELF-PROTECTION FEATURE
If you switch off the appliance after using the compressor (with the ice-cream feature and cooling
function), you will then not be able to use the compressor again for 3 minutes. This is a safety feature to
prevent overheating.

CLEANING AND MAINTENANCE

· Never immerse the appliance, motor, electric cord, or plug in water or any other liquid.
· Turn off the appliance and unplug the power socket from the mains before cleaning.
· Clean the housing with a damp cloth and some mild detergent.
· Wash the following loose parts in warm water with soap: transparent lid, mixer and removable bowl.
· Dry the unit and all parts before reassembling. Do not use the appliance if it still contains water or
parts are still wet from cleaning.
PROBLEMS?
PROBLEM
The removable bowl is not easy to remove.
The removable bowl does not fit into the fixed
bowl.
When making ice cream, the mixing paddle
scrapes against the removable bowl or blocks it.
The appliance does not work.
RECIPES
VANILLA ICE CREAM
· 1/2 vanilla stick
· 2 egg yolks
· 175 ml milk
· 100 ml cream
· 75 g sugar
Wash the vanilla stick and slice it lengthwise, so the aroma can spread better in the mixture. Mix the milk
and cream, add the 1/2 vanilla stick to it and heat it up. Take it off the fire as soon as it boils. Let it cool.
Mix the egg yolk and the sugar, add the milk/cream mixture, after removing the vanilla stick. Heat it up
again, but without boiling it. When the mixture start to set, take it of the fire and let it cool down. Filter
the mixture and add it in the ice cream maker.
CHOCOLATE ICE CREAM
· 60 g dark chocolate
· 250 ml whole milk
· 35 g sugar
28
DO9243I
POSSIBLE SOLUTION
Droplets might have frozen between the
removable bowl and fixed bowl. Wait for 3 to 8
minutes before re-moving the bowl.
The removable bowl is deformed due to incorrect
use. Purchase a new bowl.
The removable bowl is deformed due to incorrect
use. Purchase a new bowl.
Make sure that the lid is placed cor-rectly. The
arrow on the motor must align with the lock
symbol.