Useful Functions; Using The Option Menu - Yamaha MCR-B043 Manual De Instrucciones

Using the Option menu

When you press OPTION, the option menu will appear in the front panel display, allowing you to make the following settings.
(eject button) cannot be operated while the option menu is displayed.
Option menu
PRESET DELETE Deletes a stored preset (shown only if the audio source is DAB
*1 Performs the initial scan (shown only if the audio source is DAB).
DAB INIT SCAN
DAB TUNE AID *1 Checks the signal strength of DAB station (shown only if the audio source is DAB).
DIMMER
Adjusts the brightness of the front panel display (1
EQ LOW
Adjusts the tonal character (low frequencies) (–10 - 0
EQ MID
Adjusts the tonal character (mid frequencies) (–10 - 0
EQ HIGH
Adjusts the tonal character (high frequencies) (–10 - 0
BALANCE
Adjusts the volume balance of the left and right speakers (L+10 - CENTER
POWER SAVING Switches the standby state, NORMAL or ECO (power saving mode)
AUTO PWR You can specify the time after which the unit will turn off (standby) automatically.
STDBY If no operation occurs for the duration you specify, the unit will turn off (standby) automatically
(TIME 12H: 12 hours, TIME 8H
will not turn off (standby)).
CLOCK SET Sets the date and time.
ALARM SET Sets the alarm.
BLUETOOTH
Connects this unit and your component via Bluetooth (ON
*1 MCR-B043D only
*2 Default setting

Procedure for settings
1 4
2 3
18
En

USEFUL FUNCTIONS

Setting or range
*2 : 8 hours, TIME 4H: 4 hours, TIME 2H: 2 hours, OFF: the unit
1 Press OPTION.
The option menu will appear.
2 Press
want to set, and then press ENTER.
3 Press
ENTER to confirm the setting.
If you want to continue making other settings, repeat the
procedure from step
4 Press OPTION to exit the option menu.
If you decide to cancel without changing the setting, press
OPTION before confirming the change.
*1
/FM).
*2 : bright, 2: medium, 3: dim).
*2 - +10 dB).
*2 - +10 dB).
*2 - +10 dB).
*2
*2
: enable, OFF: disable).
 /  to select the menu item that you
 /  to edit the setting, and then press
.
2
See page
13, 16
11
14
–
–
–
–
- R+10).
–
5
–
6
20
9