Using the sleep timer
When the specified time has elapsed, the unit will turn off automatically.
Using the alarm function (IntelliAlarm)
The unit includes an alarm function that plays back audio sources or a set of beep (internal alarm sound) at the set time using
a variety of different methods. The alarm function has the following features.
3 types of alarms
Select from 3 alarm types, combining music and beep sounds.
The selected audio source and the beep sound are played at the set time. Source playback begins to fade in 3
SOURCE+BEEP
minutes before the set time and the volume gradually increases to the set volume. Then, at the set time, the
beep sound is activated.
The selected audio source is played at the set time. The volume fades in gradually and increases to the set
SOURCE
volume.
BEEP
The beep sound is played at the set time.
Various audio sources
You can choose from audio CD, data CD, USB device, or DAB
depending on the audio source:
Source
Selected track
Audio CD
Resume
Folder
Data CD/USB device
Resume
Preset station
*
DAB
/FM
Resume
* MCR-B043D only
You can not choose Bluetooth and AUX as the audio source.
Snooze
The snooze function can be enabled to replay the alarm after 5 minutes (☞ P. 21).
Playback
method
The selected track is played repeatedly.
The track you listened to last time is played back.
The selected folder is played repeatedly.
The track you listened to last time is played back.
The selected preset station is played.
The DAB
*
/FM station you listened to last time is played back.
Press SNOOZE/SLEEP repeatedly to specify the
time after which the unit will turn off.
You can specify 30, 60, 90, 120 or OFF.
When you select a time, the sleep timer is turned on, and the
sleep indicator (
) is shown in the front panel display.
If you press SNOOZE/SLEEP while the sleep timer is activated,
the sleep timer setting will be canceled.
*
/FM. The following playback methods can also be selected
Function
USEFUL FUNCTIONS
19
En