Parts Description; Before The First Use - Kalorik WM 47674 Manual Del Usuario

• The electrical rating of the extension cord should be at least that of
the appliance. If the electrical rating of the extension cord is too
low, it could overheat and burn.
• The resulting extended cord should be arranged so that it will not
drape over the countertop or tabletop where it can be pulled on by
children or tripped over.

PARTS DESCRIPTION

See page 2-3.

BEFORE THE FIRST USE

• Before using the appliance for the first time, remove and peel off all
promotional and packaging materials. Check that the cooking
plates are clean and free of dust.
• Clean the waffle maker (See "Cleaning and Care") and place the
unit on a flat, dry, and heat-resistant surface.
• Uncoil the main cord completely.
• It is recommended to heat the waffle maker for about 10 minutes
without any foods on its surfaces.
Note: When first turned on, the device may give off some smoke and
slight odor. This is normal and results from residue from fabrication,
which will go away after use and not last for long.
OPERATION
1. Place the appliance on a flat, level surface.
2. Uncoil the cord completely. Check if the heating plates are clean
and dust-free. If necessary, wipe them with a damp cloth and let
dry before use.
3. Connect the plug to a power outlet. The unit will turn on
automatically, signaled by a red indicator light. Keep the appliance
closed as it heats up. Once the unit has finished preheating (in
about 2 to 3 minutes) the green light will turn on to indicate the
waffle maker ready to use. Please note, when ready to use both the
red and green indicator lights will be on.
www.KALORIK.com
6
WM 47674 - 200605