SOLIS Barista Perfecta Plus Manual Del Usuario página 32

CLE A NING CY CL E HA S TO BE P E RF O R ME D :
■
EN
BUTTO N F LA S H E S WHI TE / R E D
For the cleaning alarm, the
alternately flashes white and red,
the button lights up white.
Please refer to page 29 for information on how to perform the cleaning cycle.
DES CALIN G C YC LE HA S T O BE P E RF O RM ED :
■
B UTTON FL A S HE S R E D
For the descaling alarm, the
both coffee buttons light up white.
Please refer to pages 30–31 for information on how to perform the descaling cycle.
ATTENTION: It is possible that multiple alarm signals are displayed at the same time.
In such a case, each alarm should be fixed individually according to the description
in the manual, until all alarms have gone out and both coffee buttons constantly
light up white again.
ALARM SI GN A L
■
"COFFE E D IS P E N S IN G NO T P O S S I BL E" :
BO TH COFF E E BU TT O NS F LA S H TW I CE
AND TWO S IGN A L S A R E S O UN D E D
Possible reasons and fixes:
When water tank is empty the machine will stop to brew coffee or pouring hot water
or steaming after a few seconds.
Fill the water tank up to the Max marking and press one of the two coffee buttons.
The two coffee buttons constantly light up white if the appliance is ready for use
again.
IMPORTANT: Please always fill the tank with water after the filter has been installed
and start the settings and the rinse cycle for the new filter as described on page 17.
Coffee dispensing is not possible because the coffee is ground too finely:
The pump stops if no coffee is dispensed after 60 seconds and two signals are
sounded.
Change out the ground coffee in the filter, the coffee powder has to be less finely
ground.
32
button
button flashes red,