Cleaning Agitator - Panasonic MC-V5706 Instrucciones De Operación

+
End Cap
Bouchon
Tapa del
extremo
Agitator Shaft (Inside)
Arbre de l'agitateur
(à l'intérieur)
Eje del agitador (Dentro)
Replacing Belt
Groove
Ouverture
Ranura

Cleaning Agitator

- 30 -
➢ ➢ Reinstall agitator back into nozzle
housing grooves.
➢ ➢ After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.
➢ ➢ Reinstall lower plate.
➢ ➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ ➢ Remove lower plate.
➢ ➢ Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
➢ ➢ Remove agitator.
➢ ➢ Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢ ➢ Reinstall agitator and lower plate.