IKEA LAGAN Manual Del Usuario página 14

BEfOrE SETTING SUrfACE CONTrOLS
Element On and Hot Surface Indicator
Lights
The ELEMENT ON indicator light will turn on when
one or more elements are turned on. A quick glance
at this indicator light when cooking is finished is
an easy check to be sure all surface elements are
turned off.
figure 4: On indicator light
The HOT SURFACE indicator light will turn on when
the burner is hot enough to cause burns and will
remain on after the burner is turned off until the
surface has cooled to a safe temperature.
figure 5: Hot surface indicator light
14
Types of Ceramic Cooktop Elements
The circles on the ceramic glass cooktop outline the
size and type of element underneath. The elements
on your cooktop depend on the model.
• A single radiant element has one circle.
• A dual radiant element (some models) has two
circles. The dual radiant element may be set us-
ing only the smaller inner element or both inner
and outer elements may be set to heat together
for a larger surface.
figure 3: Single and dual elements
• Dual elements allow more flexibility with the size
of cookware.
• A keep warm element (Warmer Zone) has one
small circle. It is used to keep food warm after
cooking. The keep warm element is not designed
to cook food.
EN
EN