Important Safety Instructions; Intended Use; Installation Warning - Vornado GLIDE HEAT Guia Del Propietario

READ ALL INSTRUCTIONS BEFORE
USING THIS HEATER

IMPORTANT SAFETY INSTRUCTIONS

This owner's guide and any additional inserts are considered part of
the product. They contain important information about safety, use and
disposal. Before using the product, please familiarize yourself with all
operating and safety instructions. Please keep all documents for future
reference and pass these documents on, together with the product,
to any future owner. See our website to view, download and print the
most current version of this owner's guide.
INTENDED USE: This product is intended to heat and circulate
the air in indoor living spaces only. This product is not intended
for commercial or industrial use. The manufacturer assumes no
responsibility for damage or injury due to unauthorized use or
product modification. Failure to follow these directions will void the
product warranty.
WARNING: Risk to Children and Impaired Persons
- Extreme caution is required during the installation, operation,
cleaning and maintenance of this product by or around children
under age 12 and anyone with reduced physical, sensory or
mental capabilities, and whenever the heater is left operating and
unattended. Children should be supervised to ensure that they do
not play with the appliance, its parts and packaging material.
INSTALLATION WARNING—To reduce risk of fire, electrical shock
and injury to persons, observe the following:
- A heater has hot and arcing or sparking parts inside. Do not use it in
4
English
areas where gasoline, paint, or flammable liquids are used or stored.
- Do not use this heater in an RV, boat or during any application
where battery power is converted to AC power.
- Place this product at least 3 feet away on all sides from, electrical
outlets, furniture, pillows, bedding, papers, clothes, curtains and
other objects that may cause or catch on fire. Do not place the
heater near a bed because objects such as pillows or blankets can
fall off the bed and be ignited by the heater.
- To prevent a possible fire, do not place the heater on soft
surfaces, like a bed, where air intakes or exhaust can be blocked in
any manner.
- No part of this product (the appliance, power cord, plug, packaging,
etc.) should be placed near furnaces, fireplaces, stoves or other high
temperature heat sources. Do not use in a window, on an uneven or
unstable surface, or near water.
- Do not use this product on an elevated surface such as a shelf or
desktop. Use only while placed on the floor. Operate only in the
upright position.
- The appliance, power supply, power cord and plug cannot come
into contact with water. Do not use this product on wet surfaces.
Do not use this product in a bathtub or shower or position product
where it may fall into a bathtub, laundry, swimming pool or other
water container. Do not use this product outdoors or expose it to
weather or elements.
- Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route under furniture or
appliances. Arrange cord away from traffic area and where it will not
be tripped over. The cord should not hang over edges of counters
or be placed where it can be crimped or closed in doors. Place
appliance near an easily accessible outlet so the product can be
unplugged quickly during an emergency.
- Do not modify the product with any aftermarket accessory.
SAFE USE WARNING—To reduce risk of fire, electrical shock and
injury to persons, observe the following:
- Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or
injury to persons.
- Extreme caution is required at all times a heater is in operation.
Always unplug heater when not in use. Vornado does not
recommend unattended and unsupervised use of this heater.
- This heater is hot when in use. To avoid burns, do not let bare
skin touch hot surfaces. If provided, use handles when moving
this heater.
- Always plug heaters directly into a wall outlet/receptacle. Never use
with an extension cord or relocatable power tap (outlet/power strip).
Do not use this heater on a surge-protected unit or Ground Fault
Circuit Interrupted (GFCI) outlet. Note: GFCI outlets are typically
found in bathrooms and kitchens and feature a "reset" button to
prevent tripping of an electrical circuit.
- Before plugging power cord into electrical outlet, be sure that
all electrical information on the rating label, including voltage, is
compatible with your outlet's power supply.
- WARNING: To reduce likelihood of circuit overload, fire and electric
shock, do not operate with a solid state speed device, such as a
dimmer control switch. Use of this appliance on the same electrical
circuit as another high energy use product, such as a vacuum
cleaner, blender, variable speed fan or circular saw is not advised.
Do not use this heater with a timer designed to automatically turn
the unit on or off, as this may accidentally disable the heater's
thermal cutout safety feature.
- Risk of fire. Do not operate if it has been dropped or if damage is
apparent to any part of the unit including the cord and plug. Only
original replacement parts may be used.
- Never use the cord as a handle or otherwise yank, strain or stretch
the power cord.
- While the product is plugged in, do not insert or allow foreign
objects to enter any ventilation or exhaust opening as this may
cause an electric shock or fire, or damage the heater.
- Check your heater cord and plug connections. A loose fitting outlet
can cause the plug to overheat or cause a fire. Be sure plug fits tight
in the outlet. Check frequently during use to make sure plug and
outlet are not hot. If so, discontinue using heater and have outlet
replaced by a qualified electrician.
- Never ignore the signs of an electrical problem, such as: warm
outlet coverplates, sparks when plugging in or operating, lights
flickering/dimming during operation. Immediately turn off and
unplug the appliance if any such problems are noticed. Contact a
qualified electrician to investigate possible causes before operating
the appliance again.
- Note: Heaters draw more current than small appliances,
overheating of the outlet may occur even if it has not occurred with
the other appliances.
- This appliance has a polarized plug (one blade is wider than the
other.) To reduce the risk of electrical shock, this plug is intended to
fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
- To disconnect heater, turn controls off, then remove plug from
outlet.
- Before moving, repositioning, servicing, cleaning and when not in
use, use the product controls to turn off the power and then unplug.
To disconnect from outlet, grasp and pull only the plug. Also, power
off and unplug if the product will be left unattended for an extended
period of time or during electrical storms.
5
English