Cleaning; Storage; Reset Heater; Resetting Your Vornado Heater - Vornado GLIDE HEAT Guia Del Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING

Because your heater moves a substantial amount of air, it will need regular cleaning. Cleaning the outside of the heater is recommended
on a weekly basis. If service is required, return your heater to Vornado. (See WARRANTY for instructions.)
1. Unplug heater before cleaning.
2. Use brush attachment on
household vacuum cleaner
to vacuum any accumulated
dust off Air Inlets on the
back of heater.
10 English

STORAGE

During the off-season or after extended periods of non-use, you may
choose to store your heater. To ensure long life of the product, it is
recommended to store your heater by following these instructions:
You should periodically blow
out the heater with pressurized
Cleaning is recommended before storage.
air to keep heat element and
motor clear of dust, hair and debris
that can build up inside the heater
1. Unplug power cord and
as it moves air during use. This also
bundle loosely.
eliminates unwanted odors caused
by accumulation of these particles
2. Cover, or place back in retail carton
inside the unit.
if available. This prevents heater
from accumulating dust over time.
3. Use brush attachment on
household vacuum cleaner to
3. Store heater in cool and
vacuum any accumulated dust
dry location.
off Front Outlet Grill.
4. Wipe down entire heater with a
soft, dry cloth.
Note: Do not modify this product
DISPOSAL
with any aftermarket accessory.
Dispose of all packaging
materials in an environmentally
responsible manner.

RESET HEATER

RESETTING YOUR VORNADO HEATER

Your Vornado Heater has a multilevel safety shut-off system designed
to prevent overheating. Overheating may occur when the inlets or
outlet are blocked. If this happens, the safety shut-off system cuts
power to the heater and you must manually reset the heater.
1. Power heater off, then unplug power cord.
2. Remove any obstructions.
3. Wait 5–10 minutes, allowing heater to cool down.
4. Plug in power cord and place heater in desired position.
5. Power heater On. Your Vornado Heater should now function
normally.
Note: If the safety shut-off system
repeatedly shuts off your heater or if it
will not reset after following the above
procedure, call Vornado Consumer
Services Department toll-free at
1-800-234-0604.
11
English

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido