Krups EA9000 Serie Manual Del Usuario página 10

KRUPS
SERIE EA9000
n
Emptying the used coffee collector
Open the left door. Remove the used coffee
collector by pulling it
towards you.
Empty the used grounds.
Replace the used coffee
collector.
Open the left door (15). Remove the used coffee collector (5). Empty and clean it before putting it back
n
in place.
! Caution: Do not wash it in the dishwasher.
At stage check the messages on the touch screen
n
Emptying the drip trays
Remove the small drip tray. Empty the small drip tray.
Replace the large and small drip trays.
14
Remove the large drip tray. Empty the large drip tray.
Wipe the metal contacts.
Your machine has two drip trays (6 and 7).
The small drip tray collects drips from the coffee nozzles but can be removed for preparations with
n
tall glasses.
The large drip tray collects used water and overflows from the small drip tray.
n
The large drip tray is fitted with an overflow detection sensor.
n
When it needs to be emptied, the request will be made on the screen.
n
The cover of this tray is necessary to avoid excessive condensation and water spills.
n
!
Caution: The cover and the grid can fall when you empty the drip tray.
If the tray is dirty, clean it under running water. If the metal contacts are dirty, clean by scrubbing
n
them under water. Wipe the metal contacts dry before putting them back in the machine.
The drip trays will be separated when you empty them. Avoid spilling water as much as possible on
n
the metal contacts located at the end of the drip tray.
If the machine asks you to empty the drip tray when it is empty, check whether the metal contacts
n
at the back of the drip tray are clean and thoroughly dry.
n
Adjusting the coffee nozzle height
n
If using a mug: Caffe latte glass* without the small drip tray
ENGLISH
* Caffe latte glass not supplied
Your machine is supplied with two cups only which can be used
for cappuccino or a caffe latte.
15