Lenco PIR-510 Manual Del Usuario página 25

Remark about bad reception in DAB mode
If you experience a bad reception in DAB mode and your PIR-510 is connected to the Wifi and you
have set up the LOCAL RADIO to your city, you can push 5 seconds on the OK button and the device
will switch automatically your selected DAB station to the same station through the internet radio.
Advise about use of Lenco PIR-510 battery:
When not connected to an external power adaptor, the internal battery will always use energy, even
in standby mode. We advise to use the Standby-by position only when connected to an external
power supply. When not connected, better power off the product with the power off selector at the
side.
If you want to use the wake up/alarm function, we advise to do this only when the product is
connected to the external power supply, otherwise the risk is that the battery goes empty at night
and there will be no wake up in the morning.
Important notice: when using the PIR-510 in Battery mode, you may set the alarm, but the alarm
symbols will not appear on the display meaning the alarm will not trigger as long as the unit is
NOT connected to the mains power. If you connect the mains power, the symbols will show and
the configured alarm will trigger.
25