Lenco PIR-510 Manual Del Usuario página 8

Initial use
The PIR-510 doesn't come with a supplied power adaptor. To charge the device, please connect it
with the supplied micro USB cable to a 5V usb adaptor (example: smartphone charger) or connect it
to the usb port of a computer to charge.
While charging you can switch the device on with the main power switch (12) on the side.
At the initial start of the PIR-510, it will ask you to set Language and Network Configuration. Follow
the instructions in this manual, how to configure.
Longpress the Standby button will switch to standby mode. Short press this button to turn the unit
on again.
If you won't be using the PIR-510 for a longer period, it is better to use the main switch on the side
Wifi setup wizard
1. When it is first time running the device, it will ask you to set Language and Network
Configurations.
1
2
8