Taurus VIRAGE ACTIVE Manuel De Instrucciones página 8

English
Bagless vacuum cleaners
Virage Active
DESCRIPTION
A Floor brush
B Extendable tube
C Hose set
D Manual air regulator
E Hose head
F Automatic cord rewind
G On/off switch
H Carry handle
I Extraction button for deposit
J Dust Tank
K Opening button for deposit
L Cord housing
M Crevice nozzle
N Multi-use brush
O Grill outlet filter
P Outlet filter
Q Motor filter
R Wheels
USE AND CARE:
- Do not use the appliance without its filter(s)
correctly in place.
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance if the accessories
or consumables attached to it are defective.
Replace them immediately.
- Do not use the appliance to gather up water or
any other liquid.
- Do not use the appliance if the on/off switch
does not work.
- Use the appliance handle/s, to catch it or move
it.
- This appliance is for household use only, not
professional, industrial use.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Make sure that dust, dirt or other foreign ob-
jects do not block the fan grill on the appliance.
- Use the appliance and its accessories and
tools in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use the appliance
for operations different from those intended
could result in a hazardous situation.
- Do not work on areas where there are metal
objects, such as nails and/or screws.
- Never vacuum hot or sharp objects (cigarette
butts, ashes, nails, etc.).
- Only use the appliance for carrying out dry
tasks.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
VACUUMING FUNCTION:
- Connect the hose unit to the air inlet of the vac-
uum cleaner by turning it clockwise (Fig. 1).
- To uncouple the hose unit, turn it counterclock-
wise until it can be removed. (Fig. 1).
INSERTION OF ACCESSORIES INTO THE
APPLIANCE'S GRIP:
- The appliance's grip is designed in such a way
that it allows the insertion of the following ac-
cessories (use the combination that best meets
your requirements):
- Extendible tube: designed to provide access to
surfaces which are out of reach and make floor
cleaning comfortable, its length can be adjust-
ed by using the adjustment control. (B)
- Floor nozzle: specially designed for cleaning
floors (both rugs and carpets and hard floors),
its base has a retractable brush that can be
adjusted to two heights for greater efficiency on
these floors. It is advisable to have the brush
out for hard floors and the brush in for rugs and
carpets.
- Crevice nozzle: specially designed for getting
into cracks and difficult corners. (M)
- Multi-use brush: To clean textile and furniture
surfaces. (N)
USE:
- Take the length of cable required out of the
housing. (L)
- Connect the appliance to the mains.