Taurus VIRAGE ACTIVE Manuel De Instrucciones página 9

Ocultar thumbs Ver también para VIRAGE ACTIVE:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
- Turn the appliance on, by using the on/off
button. (G)
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off using the on/off button.
(G)
- Unplug the appliance from the mains.
- Retract the cable by pressing the roller cable
button and guide the cable into the appliance.
(F)
- The cable housing means you can remove and
have available the required length of cable for
working with the appliance, preventing accident
risk situations.
- Clean the appliance.
CARRY HANDLE/S:
- This appliance has a handle on the upper
part of the body, which facilitates comfortable
transportation (H).
PARKING POSITION:
- This appliance has its own parking position for
comfortable and straightforward storage.
- To make use of the horizontal parking hook the
head's hook onto the hook that is to be found
on the lower part of the appliance. (Fig. 2).
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
EMPTYING THE DUST BOX
- Empty the dust container after each use of the
vacuum cleaner.
- Disconnect the hose from the vacuum cleaner
air intake. (Fig. 1).
- Disconnect the dust box from the appliance.
(Fig. 3).
- Open the lid of the dust box and empty the
contents into the appropriate waste disposal
receptacle. (Fig. 4).
- Check the condition of the motor filter.
- Close the lid of the dust box.
- Attach the dust box to the appliance.
- Connect the hose to the vacuum cleaners air
intake. (Fig. 1).
CHANGING THE FILTERS:
- Motor filter, it is advisable to periodically check
the state of the filter, which should be cleaned/
replaced after every 50 hours of use.
- HEPA type air outlet filter (high efficiency air
filter which effectively removes spores, ash,
dust mites, pollen ...), it is advisable to period-
ically check the condition of the filter, it should
be cleaned/replaced after every 50 hours of
use, or if a significant drop in suction power is
noticed
TO REMOVE THE FILTERS:
MOTOR FILTER:
- Disconnect the dust tank from the appliance.
(Fig. 3).
- Remove the HEPA filter (Q2) from its housing
by rotate it as the arrowhead show. (Fig. 5).
- Rinse the HEPA filter in the lukewarm water
and dry it during 24h.
- To reassemble the filter, proceed with the
above instructions, in reverse order.
OUTLET FILTER:
- Rotate the grill outlet filter as the arrowhead
show. (Fig. 6).
- Remove the filter (P) from its housing. (Fig. 7).
- To reassemble the filter, proceed with the
above instructions, in reverse order.
SUPPLIES
- Supplies can be acquired from distributors
and authorised establishments (such as filters,
etc...) for your appliance model.
- Always use original supplies, designed specifi-
cally for your appliance model.
- These supplies are available in specialist
shops.

Publicidad

Tabla de contenido
loading

Tabla de contenido