Instructions For Assembly; List Of Spare Parts - Kettler HKS-SELECTION X7 Manual De Montaje

mass is due to the construction and has no negative effect upon
operation. Possibly occurring noise during reverse pedalling
result from engineering and are absolutely safe.
I The exercise cycle has a magnetic brake system.
I The equipment is independent of revolutions per minute.
I Please ensure that liquids or perspiration never enter the
machine or the electronics.
I Before use, always check all screws and plug-in connections

Instructions for Assembly

I Ensure that you have received all the parts required (see
check list) and that they are undamaged. Should you have any
cause for complaint, please contact your KETTLER dealer.
I Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
I The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
I Please note that there is always a danger of injury when
working with tools or doing manual work. Therefore please be
careful when assembling this machine.
I Ensure that your working area is free of possible sources of
danger, for example don't leave any tools lying around.
Always dispose packaging material in such a way that it may
List of spare parts page 26-27
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the
product (see handling).
Example order: Art.no. 07687-000 / spare-part no. 10100030
/ 2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in
(internal) packaging, which is safe for transportation, in the ori-
ginal box if possible.
It is important to provide a detailed defect description / damage
report!
Important: spare part prices do not include fastening material;
if fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material".
as well as respective safety devices fit correctly.
I Always wear suitable shoes when using.
I Use for your regular cleaning, maintenance and care our
appliance maintenance set (Article no. 07921-000) specifi-
cally licensed for KETTLER Sports apparatus and available from
the Sport specialized tra
I Nobody may be in the moving range of a training person during
training.
not cause any danger. There is always a risk of suffocation if
children play with plastic bags!
I The fastening material required for each assembly step is
shown in the diagram inset. Use the fastening material exactly
as instructed. The required tools are supplied with the equipment.
I Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check
that all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be
replaced.
I For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).
Waste Disposal
KETTLER products are recyclable. At the end of its useful
life please dispose of this article correctly and safely
(local refuse sites).
KETTLER (GB) Ltd.
GB
Merse Road · North Moons Moat · Redditch,
Worcestershire B98 9HL · Great Britain
http://www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road · Virginia Beach · Virginia VA
23450 USA
http://www.kettlerusa.com
5