Positioning - Brandt BFD672MNX Guía De Instalación Y Uso

POSITIONING

The unit should be placed in a ventilated
and dry environment. Do not put the unit
in direct sunlight, and keep it as far as
possible from heat sources.
Don't put the unit in cold area.
The unit should be placed on flat and
stendy ground. Keep the unit level by
adjusting the front leg levelers.
There should be enough, spare space around the unit
as shown, to allow proper ventilation.
No less than 10cm from the back of the refrigerator to
the adjacent walls respectively. This requirement is
good for open and close of the door and also for heat
emission.
12