Install oven
Install_NV31T4551SS_AA_DG68-01266A-00_EN.indd 13
1.
Have two or more people lift the oven
using the handles on the sides of the
oven, and then put the oven partially
into the cabinet cutout.
NOTE
Carefully push against front oven frame.
2.
Push against the seal area of the front
frame to push the oven into the cabinet
until the back surface of the front frame
touches the front wall of the cabinet.
3.
Push oven completely into the cabinet
and center the oven into the cabinet
cutout.
4.
Remove the tape from front trims.
•
Securely fasten the oven to the
cabinet using the screws provided.
•
Insert the screws through hole in
trim aligning with hole in oven
frame. Do not overtighten screws.
Mounting the oven
Make sure to leave a gap (A) of at least
(5 mm) between the oven and each side of
the cabinet.
A
Secure at least
B
the door opens and closes smoothly.
Fit the oven into the cabinet and fix the
oven firmly on both sides using 2 screws.
/
"
1
4
/
" (3 mm) of gap (B) so that
1
8
English 13
2020-02-27 PM 3:58:37