Setting Up Your Computer; Necessary To Know Before Setup; Selecting A Location; Opening The Package - Packard Bell IMEDIA .U7M Serie Guia Del Usuario

Setting up your computer

The Packard Bell is a versatile and powerful system, supporting a
mainstream performance CPU. The computer uses a state-of-the-art bus
architecture, which improves system efficiency and helps the system
support varied multimedia and software applications.
Your Packard Bell has standard I/O (input/output) interfaces such as a
parallel port, PS/2 keyboard and mouse ports, USB ports, and stereo
microphone, line-in and line-out jacks (configuration may vary by models).
The system can accommodate extra peripheral equipment through these
I/O ports.
Your system can also support an optional high-speed fax/data modem or
an additional LAN (local area network) card.

Necessary to know before setup

Selecting a location

Selecting the optimum location for your computer:
•
Do not place the system too close to other electrical equipment.
•
Do not place the system in high-traffic areas or where the power cord
or other cords may be stepped on.
•
Avoid placing the system in any location that is excessively dusty or
damp.
CAUTION: Please use the foot stand when placing your PC in the upright
position.

Opening the package

Open the package carefully and keep all packing materials for later use.
Ensure that all items are present and in good condition. If any of the
following items are missing or appear damaged, contact your dealer
immediately:
•
Packard Bell
•
Mouse (PS/2 or USB)
•
Keyboard (PS/2 or USB)
3