Connecting Peripherals; Starting Your Computer; Shutting Down Your Computer; System Upgrade (Selected Models Only) - Packard Bell IMEDIA .U7M Serie Guia Del Usuario

4
•
Wireless keyboard with pointing function
•
Remote control
Note: Mouse, keyboard, wireless keyboard or remote control
configuration may vary by selected models
•
User's Guide and Starter poster
•
Other user documentation and third-party software.

Connecting peripherals

After everything is connected, plug the power cord into the system and
insert the other end into a power outlet.
Note: Don't connect the system power cord before connecting all
peripherals to the system.

Starting your computer

After connecting all the peripheral equipment, start your computer
according to the steps below:
1 Turn on all peripheral equipment, such as the monitor, printer, fax,
speakers, etc.
2 Turn on the system. Once the start up process is complete, you can
begin to use your computer.

Shutting down your computer

In the event of a system crash, press and hold the power button on the
front of the system for four seconds. After the system has shut down, turn
off all peripheral devices.

System upgrade (selected models only)

You can expand your Packard Bell system quickly and easily by adding
components. You can also upgrade the components of your Packard Bell
system.
Setting up your computer