Opening The Computer; Setting Up New Components - Packard Bell IMEDIA .U7M Serie Guia Del Usuario

Opening the computer

Before removing any panels or covers, please make sure to shut off the
computer and unplug the power cord from the outlet.
•
Remove the screws on the chassis.
•
Slide the panel off.

Setting up new components

You can only use components compatible with Packard Bell computers.
Before you choose new components, please ask your authorized Packard
Bell dealer whether the part will operate within your Packard Bell system.
In order to ensure proper setup and installation, please refer to the
instructions provided with your new components.
Probable upgrades are:
•
Upgrade to high-capacity HDD
•
Expand high-level memory
•
Upgrade from a CD-ROM drive to CD-RW, DVD-ROM, DVD/CD-
RW combo or DVD writer (selected models only)
•
Install additional interface cards in empty PCI slots, e.g., PCI fax/
modem card (selected models only)
5